|
|
|
|
Reflections Not much to really look back at here, I'm kind of surprised I didn't stay up late to get this welded. |
 | |  |
|
Two Holes Filled, One Found (2)
The front floor went in relatively smooth having already had it in at least once. First thing was to sand down all the edges and put weld-through primer down. Once the primer setup I slipped the panel in and lined up the critical areas then put in some sheet metal screws to keep it there while I lined up the rest. With the panel in place I put in probably 90 plus screws, along the way I needed to make a few relief cuts. By the time I got all that done it was too late to weld it in. | |
 | |  |
