|
|
|
|
Reflections Maybe in a few years I'll look back at this and reflect. |
 | |  |
|
Smooth
The new pushrods and rocker screws came in. One thing that needed to be done was to clean the casting on the mating surface of the rockers. I used an abrasive pad and went at it, I would then run a stud into it and check for high spots with a magnifying glass. Some of the rockers had a different casting, some the casting ridge was in the center, others the side. | |
 | |  |
| | |
|
| |
| | |
