Older


Index


Newer


Reflections

Maybe in a few years I'll look back at this and reflect.


Title

September 26, 2021

One of the odd things about the C-bodies is the way the sway bars attach to the strut rods. The hole in the bushing was about the size of the threaded part of the shaft and there was a shoulder it needed to go over and down the shaft that is also larger than the hole.

While I was getting all the stuff ready I started a pan of water on the stove with the bushings in it. I then got a mallet and socket along with some grease. Initially I was thinking this was going to take some effort. Soon as I was ready I placed the bushing on the stud hit it with the mallet and then followed up with the socket to push it the rest of the way over the shoulder. I still had some tome to slide it down by hand a little more.


Older


Index


Newer


Older


Index


Newer