Older


Index


Newer


Reflections

Maybe in a few years I'll look back at this and reflect.


Title

September 11, 2021

With the calipers and rotors off I wanted to break loose the upper ball joints with the control arms still in check. My compressor is down so I attempted to do it manually with a breaker bar, I got lucky on the right side and was able to get a full turn out of it, the left not so much. The main problem was keeping the socket on the joint, there is not much on the joint for it to grab. A made a few different attempts at rigging to get the socket to stay in place, ultimately it worked.

The day was wrapped up clearing sides, the steering gear tie rods and idler will wait till after the engine is out.


Older


Index


Newer


Older


Index


Newer